How to Install the Corner Pieces of Industrial Aluminum Profile Accessories?

As we all know, aluminum profile frames are connected by industrial aluminum profiles and corresponding aluminum profile accessories, so industrial aluminum profile accessories can be said to be extremely important in the frame assembly. Today, we are going to talk about one of the common accessories - corner pieces!

The installation of them can mainly play a role in connecting and strengthening the stability of the frame. Therefore, to save costs, bolts and nuts can usually be used to replace corner pieces. However, when we use bolts and nuts, we need to drill and tap on the aluminum profiles. The design process is cumbersome, so it is still troublesome.

Installation method of corner pieces

The steps are not as cumbersome as bolts and nuts, and there is no need to punch and tap threads. Corner pieces are installed between two vertical aluminum profiles at 90 degrees. Bolts and nuts are also required for the installation of them. However, the bolts and nuts of this kind of corner piece do not need to be punched for aluminum profiles when they are used, and only the bolts and nuts need to be buckled in the notch of the profile. Generally, T-shaped nuts are required to be embedded in the notch and then fixed with flange nuts. If the frame we need to assemble is relatively large, we can use corner stiffeners.

To sum up, you should have a certain understanding of the installation of corner pieces of industrial accessories. The installation of corner pieces can not only strengthen the aluminum profile frame structure but also omit the steps of drilling and tapping!

We are an aluminum profile accessories exporter supplier wholesaler, our products satisfy our customers. And we want to be your long-term partner, any interests, welcome to contact us.