How To Choose A Bathroom Towel Holder?

You can see the existence of a bath towel rack in every bathroom. With a bath towel rack, it is very convenient for us to hang towels and put clothes on. So what is the most suitable position for installing a towel rack in the bathroom? The installation position is very particular. Let's talk about where the bath towel rack is installed and some tips for selection.

How To Install Bathroom Bath Towel Holder?

There are many different styles of the bath towel rack, so the installation positions of different styles are also different. When selecting the position, it is recommended to install the bath towel rack on the relatively open wall in the middle of the toilet. Place a bath towel on the upper layer and hang the towel under the tube. The double tube towel rack is installed on the open wall of the toilet.

There is also the need to determine the position of the towel rack according to the height of the individual and install it in a convenient place to take it. Generally speaking, if there is a bathtub, it can be installed above the bathtub. If there is no bathtub, it can be installed on the shower or side.

How To Choose Bathroom Towel Holder Set?

The bath towel rack can be selected according to the material, and then the installation function. It can also be selected according to the size of different family bathrooms, so as to avoid the disadvantage of the contradiction between the bath towel rack and the size of bathrooms.

In terms of material, if you want not to rust, you should choose space aluminum. If it is copper chrome plated, it is easy to rust and astringent; Pure copper doesn't rust, but it's expensive. Copper is still used for a long time, but you should pay attention to the specific weight when you buy it. Some copper that is very thin is not good, and it also depends on the electroplating process. If the electroplating process is poor, copper green will be generated after a long time.

The material of towel rack can be roughly divided into four categories: stainless steel material, copper material, aluminum alloy material and zinc alloy material. The characteristics of stainless steel towel rack are that the structure is not tight enough and the cost is low; All copper towel rack has the characteristics of stable structure, not easy to oxidize, good gloss and hardness; Aluminum alloy towel rack and zinc alloy towel rack are between the above two.

Identify the material of the towel rack, and use sharp tools to cut somewhere. After being cut, the inside is white metal, which is made of zinc alloy; The golden yellow inside is made of all copper; Aluminum alloy material has a soft texture and is easy to cut; Stainless steel material is not easy to cut.

Look at the surface. As the bathroom environment is humid, the surface of the towel rack must be electroplated. At present, there are mainly three electroplating methods: chromium plating, gold plating, and wire drawing, among which chromium plating is the most widely used. Before electroplating, polish and decontaminate the wool embryo of the towel rack to ensure the adsorption stability of the electroplating layer. The coating thickness is generally calculated in microns, which cannot be judged by human eyes, but the advantages and disadvantages of products can be identified by gloss and flatness.

Look at the weight. No matter what material is used for the towel rack, its rod and tube are hollow. Some bad manufacturers, in order to deceive consumers, fill the hollow towel rack rod tube with cement and other items to increase the weight of products. This is harmful but not beneficial. The increased weight is not conducive to the stability of the towel rack, which is easy to cause screws to loosen and even cause the towel rack to fall off as a whole. Consumers should not be blinded by the weight of the towel rack when purchasing, so as not to lose too much because of small things.

The styles and styles of the towel rack are different. The selection should conform to the decoration style of the home. The color of the towel rack should match the faucet and mirror. For example, the edge of the faucet should be silver-white, and the edge of the towel rack should also be silver-white, or there should be no edge at all, but do not use a gold edge, otherwise, it will make people feel very uncoordinated.